|
Linksys WRT54GP2-NA Setup
Connecting the Linksys WRT54GP2-NA to your DSL or Cable modem will let
all the computers in your home or office share the Internet. The
built-in 3-port switch lets you attach three local PCs directly, or
daisy-chain out to more hubs and switches as your network grows.
The two standard telephone jacks on the Router enable our high-quality
feature-rich telephone service through your high-speed connection even
while you are surfing the Internet. Each phone jack operates
independently.
STEP 1
Connect ethernet cable from your PC to one of the 3 LAN ports of the
router. Then connect your cable of DSL modem's Ethernet cable to the
Router's Internet port. If necessary, disconnect the RJ-11 telephone
cable of your telephone from the telephone wall jack. Then connect that
end to the Router's Phone 1 port. If you have a second telephone plug
that into Phone 2 port. Now, power up your PC, Cable and DSL modem and
your Linksys.
STEP 2
You will need the setup instructions provided by your Internet Service
Provider (ISP). If you do not have this information, then contact your
ISP before continuing.
The instructions from your ISP tell you how to setup your PC for
Internet access. Because you are now using the Router to share Internet
access among several computers, you will use the setup information to
configure the Router instead.
STEP 3
Make sure that your PC's Ethernet adapter is set to 'Obtain an IP
Address Automatically'
Open your browser and enter 192.168.15.1. When the login screen
appears, enter 'admin' for username and 'admin' for
password.
STEP 4
A setup page will appear. Choose the Internet connection type depending
on how your ISP assigns you your Internet Protocol(IP) number. When you
have finished your settings click on 'Save Settings'. When your
Router Setup screen comes back up, you should be able to browse the
Internet from your PC. If not, contact your ISP.
STEP 5
Next, choose from the main menu 'Voice' and then Line1 .
Enter your virtual number into the User Id field and SIP password
into the Authenticate Password field. Enter sip.cliconnect.com
into Registration/Proxy Server field.
Repeat Step 5 for line 2.
STEP 6
For the best voice quality, leave the Voice Quality at default.
If you have limited bandwidth choose G.729. Do not choose G.723
as it is not supported by Our Company.
STEP 7
Save settings.
STEP 8
Start calling.
|
