|
Linksys RT31P2 Setup
Connecting the Linksys RT31P2 to your DSL or Cable modem will let all
the computers in your home or office share the Internet.. The built-in
3-port switch lets you attach three local PCs directly, or daisy-chain
out to more hubs and switches as your network grows.
The two standard telephone jacks on the Router enable Cliconnect
feature-rich telephone service through your high-speed connection even
while you are surfing the Internet. Each phone jack operates
independently. It's like having two phone lines.
STEP 1
Connect ethernet cable from your PC to one of the 3 LAN ports of the
router. Then connect your cable of DSL modem's Ethernet cable to the
Router's Internet port. If necessary, disconnect the RJ-11 telephone
cable of your telephone from the telephone wall jack. Then connect that
end to the Router's Phone 1 port. If you have a second telephone plug
that into Phone 2 port. Now, power up your PC, Cable and DSL modem and
your Linksys.
STEP 2
You will need the setup instructions provided by your Internet Service
Provider (ISP). If you do not have this information, then contact your
ISP before continuing.
The instructions from your ISP tell you how to setup your PC for
Internet access. Because you are now using the Router to share Internet
access among several computers, you will use the setup information to
configure the Router instead.
STEP 3
Make sure that your PC's Ethernet adapter is set to 'Obtain an IP
Address Automatically'
Open your browser and enter 192.168.15.1. When the login screen appears,
enter 'admin' for username and 'admin' for password.
STEP 4
A setup page will appear. Choose the Internet connection type depending
on how your ISP assigns you your Internet Protocol(IP) number. When you
have finished your settings click on 'Save Settings'. When your Router
Setup screen comes back up, you should be able to browse the Internet
from your PC. If not, contact your ISP.
STEP 5
Next, choose from the main menu 'Voice' and then Line1. Enter your
Cliconnect virtual number into the User Id: field and Cliconnect SIP
password into the Authenticate Password: field. Enter sip.Cliconnect.com into
Registration/Proxy Server: field.
Repeat Step 5 for line 2.
STEP 6
For the best voice quality, leave the Voice Quality: at default. If you
have limited bandwidth choose G.729. Do not choose G.723 as it is not
supported by Cliconnect.com.
STEP 7
Save settings.
STEP 8
Start Calling
|
